Product Introduction
This product is mainly made from imidazoline, quaternary ammonium salts, polyamines, alcohols, aldehydes, ketone condensates, and other raw materials. It is widely used in the protection of oilfield oil extraction, gathering and transportation, industrial storage and water transmission equipment. It can effectively reduce the corrosion of sewage on pipelines, pipe walls, storage tanks, etc. It has good corrosion inhibition performance, good compatibility, and safe use.
The water-soluble dispersion effect is good, equally effective in freshwater or saltwater, and can provide excellent protection in carbon dioxide and hydrogen sulfide corrosion systems.
Technical Indicators
project | index | |
appearance | uniform liquid | |
pH value | 5~9 | |
freezing point，℃ | ≤-10 | |
open flash point，℃ | ≥60 | |
Emulsification tendency | No emulsification tendency | |
Corrosion inhibition performance，30mg/L | Corrosion inhibition rate | ≥75% |
pitting corrosion | No obvious pitting corrosion | |
Application
The company can provide intermediate dry agents or finished products, both oil soluble and water-soluble. The dry agent needs to be diluted with the corresponding solvent before use, with a dilution ratio of about 4-6 times. For oil and water wells with obvious corrosion caused by H2S and CO2, acid gas resistant oil well corrosion inhibitors can be selected. The product is widely used in oil and water wells and can be diluted with the original solution or water when applied. The plunger pump can be continuously or impact injected into the treatment system, and the dosage is usually around 30ppm (the dosage can also be adjusted according to environmental characteristics).
The product should be stored in a cool, dry, and well ventilated place, protected from direct sunlight, and kept sealed to prevent leakage.
